VEATON Portable 250W Submersible Pump for Dirty/Clean Water, Max Flow 7500L/H Electric Sump Pump, Automatic and Manual Operation by Float Switch
Original price was: £61.92.£51.60Current price is: £51.60.
- ✔️【THERMAL PROTECTION??Built-in motor thermal protection will automatically switch off the pump when it is overheating. It will switch on the pump after pump motor cool down.
- ✔️【AUTOMATIC FLOAT SWITCH??Adjust float switch cable length to set pump automatic running by sensing the position of water level. Float switch is also can be disabled by attaching it on the side slot, then pump works manually control. The good thing is pump can drain water as low as possible by manually control(5cm).
- ✔️【STABLE PERFORMANCE??Maximum flow rate 7500L/H and Max lift water up to 5m, it can be installed for emergency use.
- ✔️【SMALL DIRT PASSAGER??Base filter design allows to pass up to 25mm solids and removes water down to 5cm.
- ✔️【WHAT ARE INCLUDED??Portable submersible pump with 8m cable, hose adapter, and instruction manual.
VEATON is a professional manufacturer of water pumps. We have been in pump industry more than 10 years and are capable to design, research, and produce different kinds of pumps with excellent quality! With the goal of creating user-friendly and energy saving products, we have well organized quality control and R&D department, which make our products more competitive and outstanding on the market. Buy with Confident!
Submersible Clean/Dirty Water Pump ??
FSP2502C
VEATON 250W submersible pump is ideal for draining pools, garden ponds, water tanks, hot tubs, flooded areas, basements, and other large bodies of water.
A Necessary Tool For Every House.
It’s designed for use in and out of the home, including irrigating gardens, powering water features, and removing unwanted water.
- Horsepower: 250 W
- Max flow rate: 7500 L/H
- Max delivery height: 5 m
- Max immersion height: 5 m
- Voltage: 230V/50Hz
- Max grain size: 25 mm
- Hose adapter: 1″, G1?? and 1-1/4??
|
|
|
|
|---|---|---|
Minimum Water Level for Float Switch Automatically Start
|
Solid Passage
|
Performance Data
|
|
|
|
|
|---|---|---|
Lightweight And Compact
|
Oil Chamber Seal Structure
|
Setting ON/OFF Operating Point
|
|
|
|
|
|
|---|---|---|---|
|
Pumping water from Hot Tub or Swimming Pool for household. |
Draining water from Garden Ponds for lawn irrigation. |
Moving slightly dirty water from Fish Tank. |
Draining water from the Flooding Areas. |
Tips:
- The float switch can be disabled by attaching it on its side slot, so that the pump becomes manually control. With manual mode, pump can drain water as low as possible.
- If you want the flow be bigger, the height of the water that you pump out should be lower, and using the 1.25inch discharge port.
- The bigger the flow is, the wider the outlet should be.
- Before starting, tilt the pump to remove all air and wait for 15 seconds.
- If the water level is not enough height for float switch freely floating, you can hook up the floater at “ON” position, pump can still work, which means manual operation, but make sure that you never let pump be dry running. Otherwise you risk motor to be burned.
Reviews
There are no reviews yet.