Sale!
QUBEV – EV CHARGING UNIT | TYPE 2 SOCKET | 32 AMP/7.2 KW | IP65 | (17th Edition)
Original price was: £364.31.£303.59Current price is: £303.59.
- FAST & RELIABLE CHARGING | Our Type 2, Mode 3, (up to) 32A (7.2kW) QUBEV charging point provides you with fast and reliable charging for both domestic and commercial locations.
- ADJUSTABLE CHARGER POWER RATING | By default, the QUBEV charger is set to 32A ?C however, if a lower power setting is required, Amp Setting ??DIP?? Switches on the Charge Control Unit can be used to adjust the power rating between 10A, 16A, 20A, 25A & 32A.
- COMPATIBLE & COMPLIANT | Compatible with all EVs and PHEVs on the market, provided that you have the corresponding cable to plug in. The QUBEV is also tested to meet CE standards.
- WEATHER/HEAT RESISTANT | With an IP54 weatherproof rating, rest assured, you can allow your electric vehicle to recharge throughout the day and night, during all weather conditions.
- HARD-WEARING & DURABLE | The QUBEV enclosure is produced using durable ABS (UL94 HB fire rated & IK08 impact resistant) plastic, ensuring that you can recharge your vehicle for many years to come.
Common Problems
- Pins aren’t latching – Make sure to use considerable force when plugging in the cable and wiggle until the pins make a full strong connection.
- Charge settings on car – Make sure you have no timers or other settings turned on.
- Car is locked – the car needs to be unlocked and turned off to start the charging process.
- Red LED – contact customer support for troubleshooting.
- 40 Amp Type A RCBO must be bought separately and installed outside of the unit.
Charging Procedure
Follow these steps for easy charging
- Pull up to the charging point and turn off your car.
- Make sure your car is unlocked with no charge settings/timers turned on.
- Plug the Type 2 Male end into the charging unit – The LED will turn SOLID BLUE.
- Plug the Type 2 Female end into your cars charging port – The LED will turn SOLID GREEN.
- Lock your car and leave to charge. (Also locks the cable if car supports)
- After charging always remove the plug from the car first and then the charging unit.
- Amp Selector on the side of the unit allows you to change between 6A, 13A, 16A, 32A. Allowing you to install on any power supply.
- Product built from the ground up to be easy to install and maintain.
Reviews
There are no reviews yet.