KAIWEETS HT100 Voltage Tester, Dual-Range 12V-1000V/48V 1000V Non-Contact Electrical Tester, Voltage Sensitivity Electric Compact Pen with NCV, LED Flashlight, Buzzer Alarm, Wire Breakpoint Finder
Original price was: £19.00.£15.83Current price is: £15.83.
- SAFETY FIRST: It will send out multiple alarms through sound and light. When the voltage is detected, the tip will send out red light and beep. When the higher the sensed voltage is, or the closer it is to the voltage source, it beeps at a higher frequency. At the same time, the screen will be red or green, red means high voltage and live wire are detected, green means low voltage and null wire are detected.
- NON-CONTACT: With NCV inductive probe for AC voltage; Just place the tip near a terminal strip, outlet, or supply cord. When the tip glows red and the pen beeps, you know there’s voltage present. The live wire detector can automatically detect the live or neutral wire. Ideal for breakpoint Test. Handy circuit tester for electricians, homeowners.
- DUAL RANGE: Detects standard and low voltage (12-1000V AC / 48-1000V AC) for more sensitive and flexible measurements. Press the S button to adjust sensitivity and adapt low range for doorbells, thermostats, irrigation wiring etc.; The NCV sensor automatically recognizes the voltage and displays it on the bar graph.
- SECURITY LEVEL: IEC rated CAT III 1000V CAT IV 600V, Meets CE requirements; The electrical tester is safely double insulated. High Voltage Alert to warn you of voltage above 90V, the screen turn red and the safety symbol on the screen shines.
- COMPACT DESIGN: Bright LED flashlight for work in dim ares; Low-Power-Indicator when battery voltage is below 2.5V; Automatic Power Off after 3 minutes without operation or signal detection; Pocket-sized, pen hook allows you to carry it in your shirt pocket. We provide 36-Month after sale service, Please feel free to contact us if you have any concerns.
KAIWEETS: Accurate, Reliable and Safe
Important Operation
?? Press and hold the red button for 2 seconds to turn it on.
?? In the power-on state, press and hold the green button for two seconds to turn on the LED light. Press and hold the green button again to turn off the LED light.
?? Press the green button, the green button lights up, then switches to high sensitivity mode, and press again to turn off this mode.
?? A battery icon will appear in the upper right corner when the battery is low, prompting you to replace the battery.
|
|
|
|
|
|---|---|---|---|
Adjustable Sensitivity with Dual RangeLow Sensitivity Mode; 12V TO 48V AC: No Beep, Green Screen. 48V TO 1000 V AC: High-frequency beep, The red tip illuminates continuously, red screen. High Sensitivity Mode; 12V TO 48V AC: Low-frequency beep, The red tip illuminates continuously. 48V TO 1000 V AC: High-frequency beep, The red tip illuminates continuously, red screen. |
Null Wire TestingIn sensitive mode, the buzzer will give a slow alarm with red indicator light flashes slowly, the LCD screen shows green. Indicates that the tested line is a Null Wire |
Live Wire TestingThe buzzer will give a quick warning with red indicator light flashes quickly, the LCD screen shows red. Indicates that the line being tested is a live line. |
LED flashlightPress and hold the ??S?? button for more than 3 seconds to turn the LED flashlight on/off,the LED flashlight provides good visibility in a dark environment. |
|
|
|
|
|
|---|---|---|---|
Battery replacementRotate the battery cover, remove the battery, and insert the positive terminal of the new battery toward the tip of the tester. |
Compact SizeThe maximum length is 16 cm, Similar to a pen size |
Power SavingAutomatic Power Off after 3 minutes without operation or signal detection. |
Convenient Pen HookA pocket-sized pen with a hook allows you to carry in your pocket. |
Reviews
There are no reviews yet.