MYMM® Store UK

A Registered trademark from the European Union

Category

Category

Archives: Shop

Showing 10729–10740 of 14871 results

  • Sale!

    PLA Filament 1.75mm 1kg, TINMORRY PLA Filament 3D Printing Materials for 3D Printer, 1 Spool, Standard Black

     Original price was: £27.36.Current price is: £22.80.
    • TINMORRY Standard PLA printing temperature 190??-230??, to get good adhesion on the printing plate, we recommend hot bed temperature 40- 60 ??
    • Filament diameter tolerance +/- 0.02mm, no clogging, no bubbles, make each print have excellent surface finish and high precision
    • Weight of net 1kg PLA spool in vacuum packing, keep the filament dry and clean before use
    • Good windings, tangle-free, ensure clean and easy feeding of PLA filament
    • Tips for use??1, Don’t let the end of the filament get let go, otherwise it ends up flying back due to tension, then gets tangled somewhere. 2, When not use the filament, remember to seal it in the bag to prevent the filament from absorbing moisture in the air
    Add to basket
  • Sale!

    PLA Filament 1.75mm Black, New 3D Printing Filament PLA for 3D Printer and 3D Pen, 1kg 1 Spool

     Original price was: £33.25.Current price is: £27.71.
    • ??Environmental protection: Made from starch raw materials derived from renewable plant resources.
    • ??Vacuum-sealed packaging: GEEETECH 3d filaments are carefully vacuum-packed with desiccant to maintain low humidity. And keep it dry, away from dust and foreign objects, to avoid traffic jams.
    • ??High precision +/- 0.03mm tolerance: a complete 1KG 3D printer filament spool, perfect roundness and very close diameter tolerance, about 330m filament on each spool. Easy to use, minimal deformation, odorless, non-clogging, and non-bubbles.
    • ??No tangles, no clogging: uniform diameter, roundness, not easy to draw, no deformation, strong interlayer adhesion, GEEETECH 3D printer filament has no impurities, no impurities.
    • ??After-sales service: If you are not satisfied with the quality, please contact us in time.
    Add to basket
  • Sale!

    PLA Filament 1.75mm, 3D Printer Filament PLA Dimensional Accuracy +/- 0.03 mm 1kg Spool (2.2 lbs) Black

     Original price was: £31.68.Current price is: £26.40.
    • ???Upgrade Accuracy??BIQU PLA??s ??0.03 mm tolerance is consistent, it is flexible yet strong. Minimum tolerance and low warping to ensure consistent feeding and stable prints, high successful rate, reducing the visibility of printed layer lines and gives a outstanding appearance and highly precise to all prints.
    • ???Excellent Quality?? Designed and manufactured with a clog-free patent to guarantee a smooth and stable printing experience with this PLA filament. BIQU PLA filament is compatible with most of FDM 3D printers, such as: Ender 3, Prusa, MakerBot, UltiMaker, Simplify3D, Flashforge, etc. Let’s have a smooth printing of filament and experience the fun of printing achievement!
    • ???Strong Toughness??BIQU consumables provide reasonable toughness and have low warping potential. Since its perfect roundness and very tight diameter tolerance, this PLA filament does not overlap or tangle, feed smoothly and constantly without clogging the nozzle or extruder. No bubbles, no tangle, no breaking, and odorless, ensure stable prints.
    • ???High-Grade Purity??The purity of the raw material is good and no waste is mixed, which ensures the stability of the material and the quality of printing. It is widely used in medical, teaching, industrial, and other fields.Color: Black; Diameter: 1.75mm; Spool: 1kg
    • ???Environmentally Friendly??PLA is a thermoplastic made from renewable resources such as corn starch, tapioca roots, or sugar cane. Complete drying for 24 hours before packaging and comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles.
    Add to basket
  • Sale!

    PLA Filament 1.75mm, 3D Printer Filament PLA Matte Dimensional Accuracy +/- 0.03 mm 1kg Spool (2.2 lbs) Grey

     Original price was: £25.92.Current price is: £21.60.
    • ???Upgrade Accuracy??BIQU PLA??s ??0.03 mm tolerance is consistent, it is flexible yet strong. Minimum tolerance and low warping to ensure consistent feeding and stable prints, high successful rate.You will get a unique matte models since this PLA can print shine-free color and frosted texture finish. All design is for an outstanding appearance and highly precise to all prints.
    • ???Excellent Quality??BIQU PLA Matte filament colors introduced Morandi’s color series, another title of it is “Advanced Gray”. Designed and manufactured with a clog-free patent to guarantee a smooth and stable printing experience with this PLA filament. BIQU PLA filament is compatible with most of FDM 3D printers, such as: Ender 3, Prusa, MakerBot, UltiMaker, Simplify3D, Flashforge, etc.
    • ???Strong Toughness??BIQU consumables provide reasonable toughness and have low warping potential. Since its perfect roundness and very tight diameter tolerance, this PLA filament does not overlap or tangle, feed smoothly and constantly without clogging the nozzle or extruder. No bubbles, no tangle, no breaking, and odorless, ensure stable prints.
    • ???High-Grade Purity??The purity of the raw material is good and no waste is mixed, which ensures the stability of the material and the quality of printing. It is widely used in medical, teaching, industrial, and other fields.Color: Grey; Diameter: 1.75mm; Spool: 1kg
    • ???Environmentally Friendly??PLA is a thermoplastic made from renewable resources such as corn starch, tapioca roots, or sugar cane. Complete drying for 24 hours before packaging and comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles.
    Add to basket
  • Sale!

    PLA Filament 1.75mm, 3D Printer Filament PLA, +/-0.03mm, 1kg(2.2lbs)/Spool, Agate Grey

     Original price was: £29.08.Current price is: £24.23.
    • 1.??Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable Prints??- Minimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
    • 2.??Purest-grade Material | Made in USA | Non Toxic and Limited Smell??- ERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
    • 3.??Professional Packaging | Vacuumed Sealed??- The filament from ERYONE came in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
    • 4.??High Compatibility??- Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers’ feedback.
    Add to basket
  • Sale!

    PLA Filament 1.75mm, 3D Printer Filament PLA, +/-0.03mm, 1kg(2.2lbs)/Spool,Black

     Original price was: £34.20.Current price is: £28.50.
    • 1.Print Temperature Range: 190-220.
    • 2.High Dimensional Accuracy: 1.75mm, tolerance +/-0.03mm.
    • 3.High Quality: No bubble or dust inside, neatly rolled to reduce clog or tangling, with strong layer adhesion.
    • 4.Vacuumed Sealed Packaging: Sealed vacuum bag to keep it dry and keep out dust.
    • 5.Weight and Spool Diameter: Net weight 1kg, shipping weight 1.35kg; spool inner diameter 57mm, spool outer diameter 200mm, height 64mm.
    Add to basket
  • Sale!

    PLA Filament 1.75mm, GIANTARM Classic PLA 3D Printer Filament 1kg Spool Black

     Original price was: £34.84.Current price is: £29.03.
    • ???High-quality raw materials: The raw material of GIANTARM Classic PLA filament is high-quality imported new renewable plant materials. The pla filament made of this material is not knotted, has strong adhesion, high success rate, exquisite model, and very environmentally friendly.
    • ???Vacuum packaging: GIANTARM Classic PLA filament is packaged in a vacuum bag, and a desiccant has been placed in the vacuum bag to keep it dry, dust-proof and oxidation-proof.
    • ???Recommended temperature: hotend190??C-220??C, bed60??C. This temperature is measured according to the GIANTARM GEEETECH 3D printer when making the model. If you are using a printer of another brand, you can adjust the temperature according to the actual situation of your printer.
    • ???Wide compatibility: GIANTARM Classic PLA filament is suitable for all FDM 3d printers and 3d printing pens with 1.75mm nozzles on the market. We have sold to many different brands?? users and it works well.
    • ???Our purpose and principles: Customer satisfaction. GIANTARM focuses on customer experience. If you have any questions, confusion or suggestions about GIANTARM products, please contact us through Amazon, and we will give you a satisfactory answer within 24 hours.
    Add to basket
  • Sale!

    PLA Filament 1.75mm, PLA 3D Printer Filament, PLA Filament 1KG (2.2 LBS) Spool, Dimensional Accuracy +/- 0.02mm, PLA Black

     Original price was: £33.12.Current price is: £27.60.
    • ▷【Upgrade Toughness and Not Brittle PLA Filament?? High purity PLA raw materials, superb layer bonding leads to stronger and less fragile. Fulfill your demands for printing projects with higher toughness by using Enotepad PLA filament.
    • ▷【PLA Filament No Nozzle Jamming?? Purity PLA filament raw materials and high precision diameter tolerance, 1.75mm +/-0.02mm. Strict control of uniform PLA filament diameter and selection of high-quality raw materials to avoid nozzle jamming caused by impurities and diameters. Easy handling, minimal deformation.
    • ▷【Premium Quality 1.75MM PLA Filament?? Get smooth extrusion. Uniform winding of 3D printer filament free of getting tangle. PLA filament high toughness and strong layer adhesion leads to the first perfect printed layer.
    • ▷【Recommended Printing Temp/Nozzle Temperature?? PLA 3d filament suggest printing temperature is 200°C-230??- Base Plate Temperature: 60??80??optional) – Printing Speed:50-100MM/S.
    • ▷【Vacuum Package with Desiccant?? Enotepad 1.75mm 3D Printer Filament is carefully vacuum packed with desiccant to maintain a low moisture content. And keep it dry and keep dust and foreign objects away, prevent nozzle jams.
    Add to basket
  • Sale!

    PLA Filament 3D Printer Filament 1.75mm 1kg Rainbow PLA Colour Changing Multicolor Filament 1kg(2.2lbs) Spool Pack of 1 XVICO

     Original price was: £26.92.Current price is: £22.43.
    • ??Rainbow PLA Filament??Rainbow filament 1.75mm PLA. The Main Colors are Green, Blue, Pink, Purple, Light Green,Dark Violet and Sandy Brown. It??s NOT a Fast Color Change Rainbow Filament but will have Subtle Gradual Color Change Effect on Small Object. It is Recommended to Print in Large Size to Make Sure 2-3 and Even More Distinct Colors are Included in One Model.
    • ??3D Printer Filament 1.75mm Wide Compatibility??1.75mm Filament, Suitable for a Wide Variety of Normal FDM 3D Printers. filament 1.75 pla 1kg recommended Extrusion/Nozzle Temperature 180??C – 240??C (356??F – 464??F),The PLA Spool :7.88″ – Spool Width: 2.69″ – Spool Hub Hole Diameter: 2.20″
    • ??Multicolor Filament Easy to Use?? pla rainbow filament 1.75 is full Mechanical Winding with Strict Manual Examination, Which Guarantee the Filaments Tidy and Easy to be Fed. Multicolor filament 3d drucker meeting your Demands for Different Printing Projects.
    • ??3d Pla Filament No Tangle & Bubble?? We have Strict Quality Control for pla rainbow filament 1.75 to Make Sure Every Roll Our Customer Received is in Premium Quality and Print Smoothly. It Also Works even Without a Heated Bed.
    • ??Filament rainbow pla Filament 100% Satisfaction Guarantee?? We Provide 30 Days Return and Money-Back Service, Life-time Technical Support and Timely Online Customer Service. Any Questions, Please Feel Free to Contact us Via Your Order (Click Your Account > Your Orders > Find This 3D Printer Filament Order > Click Contact Seller) Or The After-Sales Card.
    Add to basket
  • Sale!

    PLA Filament Matte PLA 1.75mm, Matte PLA Filament Roll 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer (B07VGV5VSZ)

     Original price was: £118.08.Current price is: £98.40.
    • [High-Grade Matte White PLA with Build Surface] — This newly launched filaments can output prints with shine-free color and frosted texture, which make it perfect for creation needing low-key, rich and enigmatic appearance;Grid layout on the surface for easy resizing
    • [Easy to Print & More Humanized Design] — Easy to print just like normal PLA, more likely to get quality prints with sharp details. Excellent threshold overhang angle. Raft and support are very easy to remove; Reel with length/ weight gauge and viewing hole so that you can easily figure out the remaining filaments; more filaments clip holes for fixing purpose on the reel; Larger spool inner diameter design makes feeding smoother
    • [Odorless & No Bubble] — Developed based on Natural PLA, this Matte PLA filaments deliver excellent printing quality with no odor and low warpage during printing; Complete drying for 24 hours before vacuum packaging to effectively protect the filament from moisture, no stringing and bubble-free
    • [Dimensional Accuracy & Consistency] — advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA Matte filaments of 1.75 mm diameter, dimensional accuracy + / – 0.05 mm; 1 kg spool (2.2lbs)
    • [Cost-effective and Wide Compatibility] — With over 9 years’ 3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more
    Add to basket
  • Sale!

    PLA Filament, Filament PLA 1.75 mm, 3D Printing Materials for 3D Printer, 1 kg 1 Spool,Jet Black

     Original price was: £26.92.Current price is: £22.43.
    • PLA Filament 1.75mm Recommended Extrusion/Nozzle Temperature 190-220??
    • Strict quality control, no tangles, no bubbles and no clogs, minimum diameter tolerance, ensure a smooth and successful prints finish
    • The PLA filaments are compatible with diverse FDM 3D printers in the market, Eco-friendly, safety and non-toxic
    • It comes in a vacuum-sealed package, and we provide one extra zipper-bag for storing your 3D printer filament
    • Our 3d printer filaments are made of high-quality PLA plastic (polylactic acid), it’s one of the best choice for 3D printing applications
    Add to basket
  • Sale!

    PLA Plus 3D Filament 1.75mm for 3D Printer & 3D Pens, 1KG (2.2LBS) PLA+ Filament Tolerance Accuracy +/- 0.02 mm, Bluegrey

     Original price was: £33.12.Current price is: £27.60.
    • ??Super Performance??Compared with ordinary PLA, SUNLU PLA+ has higher strength and stiffness, and 10*Times tougher than PLA filament
    • ??Advanced Production??SUNLU filament has the lowest tolerance value in the entire 3D printing filament industry, amazingly reached 1.75mm +/- 0.02mm.
    • ??Smooth And Delicate??PLA+ has better toughness, and the printed material is very smooth, and the texture after printing is more delicate.
    • ??More Details??SUNLU PLA+ Filaments are Vacuum packed, neatly arranged to prevent entanglement, 100% no bubbles.
    • ??Life-time Guarantee??24-hour professional after-sales consultation to provide you with meticulous care and best solutions.
    Add to basket