MYMM® Store UK

A Registered trademark from the European Union

Category

Category

Sale!
sourcing map 606-2RS Deep Groove Ball Bearing Double Sealed 180016, 6mm x 17mm x 6mm High Carbon Steel Z1 Bearings (Pack of 8)
sourcing map 606-2RS Deep Groove Ball Bearing Double Sealed 180016, 6mm x 17mm x 6mm High Carbon Steel Z1 Bearings (Pack of 8) - Image 4

sourcing map 606-2RS Deep Groove Ball Bearing Double Sealed 180016, 6mm x 17mm x 6mm High Carbon Steel Z1 Bearings (Pack of 8)

Original price was: £11.08.Current price is: £9.23.

  • Size: 606-2RS (Inner Dia.=6mm, Outer Dia.=17mm, Thickness=6mm)
  • Sealed on BOTH SIDES of the bearing to keep lubricant in. Suitable for complex environment
  • Made from High Carbon Steel, durability and resistance to under heavy loads
  • ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
  • Same As 606-2RS / 180016. Pre-Lubricated, Easy to maintain

NOTE??
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
With small friction and high-limit speed, Uxcell’s Deep Groove Ball Bearings are cost-effective and require little maintenance.
These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
Single-row, pre-lubricated, normal accuracy.

Selection Guide:
Shields (Designation Suffix Z/ZZ) – High speed. Protect from dirt and debris.
Sealed (Designation SuffixRS/2RS) – Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: 606-2RS
Sealed Type: Double Sealed
Material:High Carbon Steel
Heat Treatment:Quenching
Hardness: HRC50-55
Cage Material: Stamping Steel
Inner Diameter (d): 6mm
Outer Diameter (D): 17mm
Thickness (B): 6mm
Dynamic Load Rating (Cr): 1.95kN
Static Load Rating (Cor): 0.72kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 8 Pcs
Weight: 51g

Reviews

There are no reviews yet.

Be the first to review “sourcing map 606-2RS Deep Groove Ball Bearing Double Sealed 180016, 6mm x 17mm x 6mm High Carbon Steel Z1 Bearings (Pack of 8)”

Your email address will not be published. Required fields are marked *

2 × 5 =

SKU: 31HQWDF70B Category:

Related products