A Registered trademark from the European Union

Sale!

TERF? 12 Pcs Wire Rope Cable Clip Clamps M3 for ? 3mm (1/8″) Wire Rope Cable Grip Galvanized Steel U Bolt Saddle Fastener for Rigging Rope and tension cable Garden Tension Wire Ropes

Original price was: £10.28.Current price is: £8.57.

  • Package content : 12 Pcs Wire Rope Cable Clamps M3 / 3mm ? Note :- Before Buy Please Check Your Require Wire Rope Clamps Size ??
  • Material : High Quality Galvanized Steel Durable, Wear-resistant and corrosion resistance
  • Easy to install : Place the two layers of wire rope in the fixing ring and tighten the nut in the proper position after fixing. Unlike cable ties, U-shaped cable ties can be opened and reused for adjustment.
  • Non-slip design : The cable clamp consists of a U-shaped bolt, a forged saddle and two nuts. The anti-skid wire in the middle of the saddle effectively increases the friction, and the two nuts tighten the clamp to firmly hold the cable.
  • Application : Widely used in rigging rope, wire and cable, hanging shade sails, hanging patio string lights, suspended floating ceilings, safety pipes, anchor columns, fencing gates, laundry lines, anchoring, etc.

TERF Heavy Duty Wire Rope Grips Clamps:

Wide Applications: Hanging shade sails, hang floating ceilings, safety pipe,anchoring posts, squaring fence gates, making laundry lines, hanging banners,anchoring gym equipment, etc.

Specification:

Material: Galvanized Stainless Steel

Color: Silver

Surface: Polished

Size:  M3 / 3mm, for diameter 3mm wire rope or cable

The correct way to attach wire rope clipsis as following:

1. Apply the 1st clip one base width from the dead end of wire rope. The baseor saddle should bear on the live end of the rope — U-bolt on the short end.Tighten nuts firmly.

2. Attach second clip as close to loop as possible. Tighten nuts but not firmly.

3. Attach balance of clips spaced equally between 1st two clips. Tighten all nuts completely. Apply initial load–inspect nuts and re-tighten.

TIPS

1. Tighten the nut using a socket / nut driver. Drills can be used, but be sure not to over-tighten because the wires may bend.

2. Be sure to fold back a minimum of 3 inches and 3/4 inches of wire

3. Do not use plastic coated wire rope.

4. Do not install saddles on the dead ends of the cable. The dead ends of the cable only U-bolts, broken will not affect the breaking strength of the lifting wire.

5. Do not reuse the clips.

6. Inspect all clips periodically

Package included:

12 X M3 / 3mm Wire Rope Clamps

Reviews

There are no reviews yet.

Be the first to review “TERF? 12 Pcs Wire Rope Cable Clip Clamps M3 for ? 3mm (1/8″) Wire Rope Cable Grip Galvanized Steel U Bolt Saddle Fastener for Rigging Rope and tension cable Garden Tension Wire Ropes”

Your email address will not be published. Required fields are marked *

15 − 9 =

SKU: 61CZM5Y80B Category: